Toyota Tundra Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL OIL PUMP RELIEF VALVE

(a) Coat the oil pump relief valve with engine oil.

(b) Install the relief valve and relief valve spring into the oil pump cover hole.

(c) Install the plug.

Torque:

53 N·m {540 kgf·cm, 39 ft·lbf}

2. INSTALL OIL PUMP COVER

(a) Install the driven rotor, drive rotor and oil pump cover with the 13 bolts.

Torque:

10 N·m {105 kgf·cm, 8 ft·lbf}

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Automatic Transmission Fluid: Replacement
    REPLACEMENT PROCEDURE 1. REPLACE AUTOMATIC TRANSMISSION FLUID (a) Lift the vehicle. [*1] NOTICE: Set the vehicle on a lift so that the vehicle is kept level when it is lifted up (make sure that the tilt angle from the front to rear of the vehicle is within +/-1°). (b) Remove the drain plug and gask ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0047