REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH (a) Remove the exhaust manifold RH (See page ). 4. REMOVE STARTER COVER
5. REMOVE STARTER ASSEMBLY
(b) Disconnect the starter connector. (c) Remove the nut and disconnect the starter wire.
|
Toyota Tundra Service Manual > Power Tilt And Power Telescopic Steering Column System: Freeze Frame Data
FREEZE FRAME DATA 1. FREEZE FRAME DATA NOTICE: Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications. Turn the ignition switch to ON (IG) and park the veh ...