Components COMPONENTS ILLUSTRATION  Replacement REPLACEMENT PROCEDURE 1. REMOVE PROPELLER SHAFT ASSEMBLY (a) Remove the propeller shaft (See page
2. REMOVE EXTENSION HOUSING REAR OIL SEAL  (a) Using SST, remove the oil seal. SST: 09308-00010 3. INSTALL EXTENSION HOUSING REAR OIL SEAL  (a) Coat the lip of a new oil seal with MP grease. (b) Using SST and a hammer, tap in the oil seal. SST: 09316-60011 09316-00011 09316-00051 Standard depth: 5.4 to 5.8 mm (0.213 to 0.228 in.) 4. INSTALL PROPELLER SHAFT ASSEMBLY (a) Install the propeller shaft (See page
5. ADD AUTOMATIC TRANSMISSION FLUID (a) Add automatic transmission fluid (See page
|
Toyota Tundra Service Manual > Rear Brake: Inspection
INSPECTION PROCEDURE 1. CHECK PAD LINING THICKNESS (a) Using a ruler, measure the pad lining thickness. Standard thickness: 12.0 mm (0.472 in.) Minimum thickness: 1.0 mm (0.0394 in.) If the pad lining thickness is less than the minimum, replace the pad. HINT: Be sure to check the wear on the rear di ...
).
