Toyota Tundra Service Manual: Inspection

Toyota Tundra Service Manual / Engine, Hybrid System / A760e Automatic Transmission / Transaxle / Park / Neutral Position Switch / Inspection

INSPECTION

PROCEDURE

1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
2 (RB) - 6 (PL) 4 (B) - 5 (L)	Shift lever in P	Below 1 Ω
2 (RB) - 1 (RL)	Shift lever in R	Below 1 Ω
2 (RB) - 9 (NL) 4 (B) - 5 (L)	Shift lever in N	Below 1 Ω
2 (RB) - 7 (DL)	Shift lever in D, S, "+" or "-"	Below 1 Ω
2 (RB) - 6 (PL) 4 (B) - 5 (L)	Shift lever not in P	10 kΩ or higher
2 (RB) - 1 (RL)	Shift lever not in R	10 kΩ or higher
2 (RB) - 9 (NL) 4 (B) - 5 (L)	Shift lever not in N	10 kΩ or higher
2 (RB) - 7 (DL)	Shift lever not in D, S, "+" or "-"	10 kΩ or higher

If the result is not as specified, replace the park/neutral position switch assembly.

See More:

Toyota Tundra Service Manual > Touch Select 2-4 And High-low System: 4WD Control Switch Circuit
WIRING DIAGRAM PROCEDURE 1. CONFIRM PROBLEM SYMPTOM (a) Confirm the problem symptoms. Result Result Proceed to The 4HI and 4LO indicator lights are not illuminated A The 4HI indicator light is illuminated and the 4LO indicator light is not illuminated B The 4HI indicator light is not illuminated and ...

Toyota Tundra Service Manual: Inspection

Components

Installation

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual