INSTALLATION PROCEDURE 1. INSTALL COLUMN SHIFT TRANSMISSION CONTROL CABLE ASSEMBLY (a) Insert the transmission control cable from the vehicle interior, and install the cable retainer with the 2 bolts. Torque: 5.5 N·m {56 kgf·cm, 49 in·lbf}
(e) Return the floor carpet to its original position. (f) Move the shift lever to N.
2. INSTALL FRONT SEAT ASSEMBLY LH (a) for Manual Seat Type: Install the front seat LH (See page ). (b) for Power Seat Type: Install the front seat LH (See page ). (c) for Center Seat: Install the front seat LH (See page ). 3. ADJUST SHIFT LEVER POSITION
4. INSPECT SHIFT LEVER POSITION
5. INSTALL UPPER STEERING COLUMN COVER
6. INSTALL LOWER STEERING COLUMN COVER
7. INSTALL CENTER LOWER INSTRUMENT COVER
8. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
10. INSTALL COWL SIDE TRIM BOARD LH
11. INSTALL FRONT DOOR SCUFF PLATE LH
12. INSTALL STEERING WHEEL ASSEMBLY (See page ) |
Toyota Tundra Service Manual > Automatic Transmission System: Transmission Fluid Temperature Sensor "A" Performance (P0711)
DESCRIPTION The ATF temperature sensor converts the fluid temperature into a resistance value for use by the ECM. The ECM applies a voltage to the temperature sensor through terminal THO1 of the ECM. The sensor resistance changes with the ATF temperature. As the temperature becomes higher, the senso ...