REMOVAL PROCEDURE 1. REMOVE STEERING WHEEL ASSEMBLY (See page 2. REMOVE FRONT DOOR SCUFF PLATE LH 3. REMOVE COWL SIDE TRIM BOARD LH 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 5. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 6. REMOVE CENTER LOWER INSTRUMENT COVER 7. REMOVE LOWER STEERING COLUMN COVER 8. REMOVE UPPER STEERING COLUMN COVER 9. REMOVE FRONT SEAT ASSEMBLY LH (a) for Manual Seat Type: Remove the front seat LH (See page
(b) for Power Seat Type: Remove the front seat LH (See page
(c) for Center Seat: Remove the front seat LH (See page
10. REMOVE COLUMN SHIFT TRANSMISSION CONTROL CABLE ASSEMBLY ![]() (a) Move the shift lever to N. (b) Fold back the floor carpet. (c) Disconnect the column shift transmission control cable end from the column shift.
|
Toyota Tundra Service Manual > Front Seat Assembly(for Manual Seat): Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore ...