DISASSEMBLY PROCEDURE 1. REMOVE SHIFT SOLENOID VALVE SL2  (a) Remove the bolt, lock plate and 2 straight pins. (b) Remove the shift solenoid valve. 2. REMOVE SHIFT SOLENOID VALVE SLU  3. REMOVE SHIFT SOLENOID VALVE SLT  (a) Remove the bolt, lock plate and 2 straight pins. (b) Remove the shift solenoid valve. 4. REMOVE SHIFT SOLENOID VALVE SL1  5. REMOVE SHIFT SOLENOID VALVE SR
6. REMOVE SHIFT SOLENOID VALVE S1  (a) Remove the bolt, valve body wire harness clamp and shift solenoid valve. 7. REMOVE SHIFT SOLENOID VALVE S4  (a) Remove the bolt and shift solenoid valve. 8. REMOVE SHIFT SOLENOID VALVE S2  9. REMOVE SHIFT SOLENOID VALVE S3  (a) Remove the bolt and shift solenoid valve. |
Toyota Tundra Service Manual > Blind Spot Monitor System: Lost Communication with ECM / PCM "A" (U0100,U0125,U0126,U0129,U0142)
DESCRIPTION These DTCs are stored if there is a malfunction in the CAN communication system connected to the blind spot monitor sensor. HINT: If CAN communication system DTCs are stored, they may also be stored for other systems. DTC Code DTC Detection Condition Trouble Area U0100 Lost communication ...
