Toyota Tundra Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL SHIFT SOLENOID VALVE S3

(a) Install the shift solenoid valve with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. INSTALL SHIFT SOLENOID VALVE S2

3. INSTALL SHIFT SOLENOID VALVE S4

(a) Install the shift solenoid valve with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

4. INSTALL SHIFT SOLENOID VALVE S1

(a) Install the shift solenoid valve and valve body wire harness clamp with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

5. INSTALL SHIFT SOLENOID VALVE SR

(a) Install the shift solenoid valve with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

6. INSTALL SHIFT SOLENOID VALVE SL1

7. INSTALL SHIFT SOLENOID VALVE SLT

(a) Install the shift solenoid valve.

(b) Install the 2 straight pins and lock plate with the bolt.

Torque:

6.4 N·m {65 kgf·cm, 57 in·lbf}

8. INSTALL SHIFT SOLENOID VALVE SLU

9. INSTALL SHIFT SOLENOID VALVE SL2

(a) Install the shift solenoid valve.

(b) Install the 2 straight pins and lock plate with the bolt.

Torque:

6.4 N·m {65 kgf·cm, 57 in·lbf}

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Vehicle Stability Control System: Brake Pedal Load Sensing Switch OFF Stuck Malfunction (C1430,C1431)
    DESCRIPTION The brake pedal load sensing switch turns on when the brake pedal is depressed with a force exceeding a predetermined level. The skid control ECU uses this circuit to detect if the brake pedal is depressed or not. DTC No. Detection Item DTC Detection Condition Trouble Area C1430 Brake Pe ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0111