Toyota Tundra Service Manual: Disassembly

DISASSEMBLY

CAUTION / NOTICE / HINT

NOTICE:

Do not allow foreign matter, etc. to contact the ABS rotor bearing.

PROCEDURE

1. REMOVE FRONT WHEEL ADJUSTING NUT (for 2WD)

(a) Using SST and a hammer, release the staked part of the adjusting nut.

SST: 09930-00010

(b) Install a nut to the front axle hub, and fix it in a vise.

(c) Using SST and the L-type handle, remove the front wheel adjusting nut.

SST: 09602-60010

2. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY

(a) Gently fix the front axle hub in a vise.

NOTICE:

Do not damage the threads of the hub bolts.

(b) Using SST, remove the bearing.

SST: 09950-40011

09951-04020

09952-04010

09953-04020

09954-04010

09955-04061

09957-04010

09958-04011

SST: 09950-60010

09951-00550

(c) If part of the bearing remains in the front axle hub, use SST to remove it.

SST: 09950-00020

SST: 09950-00030

3. REMOVE FRONT AXLE HUB OIL SEAL

(a) Using a screwdriver, pry the oil seal.

4. REMOVE PLUG (for 2WD)

(a) Using a screwdriver and hammer, remove the plug.

    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Tire Pressure Warning System: Precaution
    PRECAUTION TIRE PRESSURE WARNING ECU AND RECEIVER EXPRESSIONS (a) The door control and tire pressure monitoring system receiver assembly is referred to as the tire pressure warning ECU and receiver in this section. TIRE PRESSURE WARNING SYSTEM PRECAUTION (a) Tire pressure decreases naturally over ti ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0044