Toyota Tundra Service Manual: Removal

REMOVAL

PROCEDURE

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER

Click here

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER

Click here

5. REMOVE STEERING PAD

Click here

6. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector.

Connector

Screw

(b) Remove the 2 screws and cruise control main switch.

(c) Disconnect the connector, remove the cruise control switch wire from the cruise control main switch.

    Installation

    Cruise Control System

    See More:

    Toyota Tundra Service Manual > Cruise Control Main Switch: Removal
    REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here 2. D ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0343