DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch ON. (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Cruise Control / Trouble Codes. (e) Check for DTCs. CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch ON. (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Cruise Control / Trouble Codes. (e) Clear the DTCs. |
Toyota Tundra Service Manual > Front Airbag Sensor: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH and RH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FRONT AIRBAG SENSOR (a) Check that the ignition switch is OFF. (b) Check that the cable is disconnected from the battery negative (-) termina ...
