DESCRIPTION The ECM receives signals from the skid control ECU (brake actuator assembly) via CAN communication.
CAUTION / NOTICE / HINT HINT: Refer to troubleshooting in CAN Communication System. Click here
PROCEDURE
(a) Clear the DTCs. Click here (b) Make sure that the DTC detection conditions are met. HINT: If the detection conditions are not met, the system cannot detect the malfunction.
(c) Check for DTCs. Click here
|
Toyota Tundra Service Manual > Front Passenger Side Knee Airbag Assembly: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION) (a) Perform a diagnostic system check (See page ). (b) With the lower No. 2 instrument panel airbag installed on the vehicle, perform a visual check. If there are any defects as ...