DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes. (e) Check for details of the DTCs. Click here
CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Front Recognition Camera / Clear DTCs. (e) Clear the DTCs. |
Toyota Tundra Service Manual > Rear View Monitor System(for Navigation Receiver Type): Precaution
PRECAUTION 1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal not ...
