DESCRIPTION When an internal malfunction is detected in the forward recognition camera, DTC C1AA0 is stored.
CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Check if the stored DTCs are current DTCs. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON. (d) Turn the Techstream on. (e) Enter the following menus: Chassis / LKA/LDA / Trouble Codes. (f) Check for DTCs.
(a) Replace the forward recognition camera. Click here (b) Adjust the forward recognition camera. Click here
|
Toyota Tundra Service Manual > Transfer Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY (FRONT) (a) Using a micrometer, measure the outer diameter of the output shaft companion flange sub-assembly (front) journal surface. Minimum Diameter: Journal Specified Condition A 34.962 mm (1.376 in.) B 39.955 mm (1.573 in ...