REASSEMBLY PROCEDURE 1. INSTALL FRONT COIL SPRING LH (a) Secure SST in a vise. SST: 09727-30021 09727-00010 09727-00021 09727-00031
(c) Using SST, compress the coil spring. CAUTION:
2. INSTALL FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH (a) Install the 2 cushions, 2 retainers and suspension support to the piston rod. (b) Temporarily install a new suspension support to front shock absorber nut. (c) Position the suspension support as shown in the illustration. (d) Remove SST. NOTICE: Do not use an impact wrench. It will damage the shock absorber rod. HINT: Release the coil spring while checking the position of the suspension support. 3. TIGHTEN FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT (a) Tighten the nut. Torque: 25 N·m {255 kgf·cm, 18 ft·lbf} |
Toyota Tundra Service Manual > Terms: Glossary Of Sae And Toyota Terms
GLOSSARY OF SAE AND TOYOTA TERMS This glossary lists all SAE-J1930 terms and abbreviations used in this manual in compliance with SAE recommendations, as well as their TOYOTA equivalents. SAE ABBREVIATIONS SAE TERMS TOYOTA TERMS ( )-ABBREVIATIONS A/C Air Conditioning Air Conditioner ACL Air Cleaner ...