REASSEMBLY PROCEDURE 1. INSTALL REAR SPRING LEAF BUSH  (a) Install a new bush to the leaf spring. (1) Install the bushing while aligning it with the matchmarks so that its openings are as shown in the illustration. NOTICE: Be sure to install each bushing to the correct positions. (b) Use SST and a press, press both bushes into the leaf spring. SST: 09710-28012 09710-07062 SST: 09710-30041 09710-03211 NOTICE: Align SST, which presses the bush, to the outer casing of the bush. |
Toyota Tundra Service Manual > Pre-collision System: Skid Control Buzzer Circuit (C1A4A)
DESCRIPTION The millimeter wave radar sensor assembly is connected to the forward recognition camera via CAN communication. The millimeter wave radar sensor assembly operates the pre-collision alarm by sending a buzzer request signal to the skid control buzzer assembly. If the millimeter wave radar ...
