REMOVAL CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. SUPPORT BODY WITH SAFETY STANDS (a) Jack up and support the body on safety stands. (b) Lower the axle housing until the leaf spring tension is free, and keep it at this position. 2. REMOVE SPARE TIRE 3. REMOVE REAR WHEEL 4. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY (a) Remove the 3 bolts and disconnect the cable from the vehicle. 5. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY LH (a) Support the rear axle housing with a jack using a wooden block to avoid damage.
6. REMOVE REAR SPRING U BOLT (a) Remove the 4 nuts, 4 washers and spring seat. (b) Remove the 2 U bolts. 7. REMOVE REAR SPRING BUMPER SUB-ASSEMBLY (a) Remove the spring bumper. 8. REMOVE REAR SPRING ASSEMBLY LH (a) Remove the nut, washer and bolt from the front side.
9. REMOVE TUBE (a) Using a brass bar and hammer, remove the tube from the frame. 10. REMOVE REAR SPRING SHACKLE BUSH (a) Remove the 2 bushes from the frame. |
Toyota Tundra Service Manual > Can Communication System: How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT PRECAUTIONS WHEN TROUBLESHOOTING NOTICE: Because the order of diagnosis is important to allow correct diagnosis, make sure to begin troubleshooting using How to Proceed with Troubleshooting when CAN communication system related DTCs are output. If the CAN communication system ...