Components COMPONENTS ILLUSTRATION ![]()
ILLUSTRATION ![]()
Installation INSTALLATION PROCEDURE 1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER (a) Connect the connector to the tire pressure warning ECU and receiver. (b) Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver. (c) Install the bolt. Torque: 7.0 N·m {71 kgf·cm, 62 in·lbf} 2. INSTALL ROOF HEADLINING ASSEMBLY
Removal REMOVAL PROCEDURE 1. REMOVE ROOF HEADLINING ASSEMBLY
2. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER
(b) Detach the 2 guides to remove the tire pressure warning ECU and receiver. (c) Disconnect the connector from the tire pressure warning ECU and receiver. |
Toyota Tundra Service Manual > Rear Seat Assembly(for Crewmax Lh Side): Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. REMOVE REAR SEAT HEADREST ASSEMBLY (a) Push the 2 lock release buttons indicated by the arrows in the illustration to release the lock, and then remove the rear seat head ...