REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL 2. REMOVE REAR WHEEL 3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER (a) Remove the cap and valve core to release the air from the tire. NOTICE: Keep the removed cap. (b) After ensuring that a sufficient amount of air has been released, remove the nut and washer used to secure the tire pressure warning valve and transmitter. Then drop the tire pressure warning valve and transmitter with the grommet into the tire. HINT: The grommet may remain attached to the rim.
(d) Separate the upper bead. (e) Take out the tire pressure warning valve and transmitter with the grommet from the tire and separate the lower bead. (f) Remove the grommet from the tire pressure warning valve and transmitter. |
Toyota Tundra Service Manual > Sfi System: Evaporative Emission System Leak Detection Reference Orifice Low Flow (P043E,P043F,P2401,P2402,P2419)
DTC SUMMARY DTC No. Monitoring Item Malfunction Detection Condition Trouble Area Detection Timing Detection Logic P043E Reference orifice clogged P043E, P043F, P2401, P2402 and P2419 present when one of following conditions met during key-off EVAP monitor: Reference orifice clogged Reference orifice ...