INSTALLATION PROCEDURE 1. INSTALL TRANSFER POSITION SWITCH (a) Attach the 2 claws to install the transfer position switch. 2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
|
Toyota Tundra Service Manual > Front Differential Carrier Assembly(for 4wd): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL STRAIGHT PIN (a) Using a plastic-faced hammer, tap in the straight pins until their protrusion amounts are at the specified values shown in the illustration below. Standard depth: Item a b c for Straight Pin A 19.5 to 20.5 mm (0.768 to 0.807 in.) 9.991 to 10.000 mm (0 ...
