DIAGNOSIS SYSTEM 1. DESCRIPTION The 4 wheel drive control ECU records DTCs when the ECU detects a malfunction in the ECU itself or in system circuits. The DTCs can be read through the DLC3 of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform troubleshooting. 2. CHECK DLC3 (a) Inspect the battery voltage. Standard voltage: 11 to 14 V If the voltage is below 11 V, recharge the battery before proceeding. (b) Check the DLC3 (See page 3. FUNCTION OF INDICATOR LIGHT (a) When a problem occurs in the touch select 2-4 and high-low system, the 4HI and 4LO indicator lights on the combination meter assembly rapidly blink* to inform the driver of the problem.
|
Toyota Tundra Service Manual > Vehicle Stability Control System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE If there are no DTCs output and the problem still occurs, check the suspected areas for each problem symptom in the order given in the following table and proceed to the relevant troubleshooting page. NOTICE: When replacing the skid control ECU (brake actuator assembly), senso ...
).
