DTC CHECK / CLEAR 1. CHECK DTC (a) Check the DTCs. (1) Connect the Techstream to the DLC3. (2) Turn the ignition switch to ON. (3) Turn the Techstream on. (4) Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes. (5) Check the details of the DTCs (See page
2. CLEAR DTC (a) Clear the DTCs. (1) Connect the Techstream to the DLC3. (2) Turn the ignition switch to ON. (3) Turn the Techstream on. (4) Operate the Techstream to clear the DTCs. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes. (5) According to the display on the Techstream, select the trouble code data display with the clear button. |
Toyota Tundra Service Manual > Vehicle Stability Control System: Stop Light Switch OFF Stuck Malfunction (C1426)
DESCRIPTION The skid control ECU (brake actuator assembly) receives stop light switch assembly signals and uses them to determine whether or not the brakes are applied. The skid control ECU (brake actuator assembly) has a detection circuit that it uses to detect a short in the stop light input signa ...
).
