DTC CHECK / CLEAR CHECK FOR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Central Gateway / Trouble Codes. (e) Read the DTCs. CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Central Gateway / Trouble Codes. (e) Clear the DTCs. |
Toyota Tundra Service Manual > Automatic Disconnecting Differential Actuator(for 4wd): Installation
INSTALLATION PROCEDURE 1. INSPECT DIFFERENTIAL VACUUM ACTUATOR ASSEMBLY (See page ) 2. INSTALL DIFFERENTIAL VACUUM ACTUATOR ASSEMBLY (a) Remove any old FIPG material and be careful not to drop oil on the contact surfaces of the differential tube and differential vacuum actuator assembly. (b) Clean t ...
