DTC CHECK / CLEAR HINT: Refer to the Techstream operator's manual for further details. 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Trouble Codes. (e) Check for DTCs. 2. CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Trouble Codes. (e) Clear the DTCs. |
Toyota Tundra Service Manual > Engine Immobiliser: Transponder Key Ecu
Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL TRANSPONDER KEY ECU (a) Hook the upper part of the transponder key ECU, and then hook the lower part to install the transponder key ECU as shown in the illustration. 2. INSTALL AIR CONDITIONING UNIT (See page ) 3. CONN ...