Toyota Tundra Service Manual: Body

General Maintenance

GENERAL MAINTENANCE

PROCEDURE

1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY

(a) Where necessary, tighten all the parts of the chassis.

• Front axle and suspension
• Drivetrain
• Rear axle and suspension
• Brake system
• Engine mounting, etc.

(b) Where necessary, tighten all the parts of the body.

• Seat belt system
• Seat
• Doors and hood
• Body mountings
• Fuel tank
• Exhaust pipe system, etc.

2. INSPECT TIRE AND INFLATION PRESSURE (Except North America)

(a) Inspect the tires for wear and proper inflation pressure (See page ).

3. INSPECT LIGHTS, HORN, WIPERS AND WASHERS (Except North America)

4. CLEAN OR REPLACE AIR CONDITIONING FILTER

(a) Remove the glove compartment assembly.

(b) Remove the air conditioning filter.

(c) Visually inspect the surface of the air conditioning filter.

(d) If the air conditioning filter is contaminated with foreign matter, clean or replace it according to the maintenance schedule.

NOTICE:

Some filters are not able to be cleaned.

5. INSPECT REFRIGERANT AMOUNT FOR AIR CONDITIONER (Except North America)

(a) Check the refrigerant pressure.

6. FINAL INSPECTION

(a) Check the operation of the body parts.

(1) Hood

• Auxiliary catch operates properly.
• Hood locks securely when closed.

(2) Front and rear doors

• Door locks operate properly.
• Doors close properly.

(3) Tail gate door

• Door closes properly.

(4) Seats

• Seat adjusts easily and locks securely in any position.
• Front seatback locks securely in any position.

• Folding-down rear seatbacks lock securely.

(5) Be sure to deliver a clean vehicle. Especially check:

• Steering wheel
• Shift lever knob
• All switch knobs

• Door handles

• Seats