PRECAUTION 1. HANDLING PRECAUTIONS FOR STEERING SYSTEM (a)
The vehicle is equipped with an SRS (Supplemental Restraint System)
such as airbags. Failure to carry out service operations in the correct
sequence could cause the SRS to unexpectedly deploy during servicing.
This may cause a serious accident. Before servicing (including
inspection, replacement, removal and installation of parts), be sure to
read the precautionary notices for the Supplemental Restraint System
(See page 2. PRECAUTIONS FOR REMOVAL, INSTALLATION AND REPLACEMENT OF POWER STEERING COMPONENTS (a) Be sure to turn the front wheels straight ahead when removing and installing the power steering gear assembly. (b) If disconnecting the steering sliding yoke and the pinion shaft of the power steering link assembly, be sure to put matchmarks on them before starting the operation. |
Toyota Tundra Service Manual > 1ur-fe Engine Control: Camshaft Position Sensor
ComponentsCOMPONENTS ILLUSTRATION InstallationINSTALLATION PROCEDURE 1. INSTALL CAMSHAFT POSITION SENSOR (a) Install the sensor with the bolt. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (b) Connect the sensor connector. 2. INSTALL V-BANK COVER SUB-ASSEMBLY RemovalREMOVAL PROCEDURE 1. REMOVE V-BANK CO ...
