Toyota Tundra Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Tilt & Telescopic / Trouble Codes.

(f) Read the DTCs.

Click here

2. CLEAR DTC

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Tilt & Telescopic / Trouble Codes.

(f) Clear the DTCs.

    Diagnostic Trouble Code Chart

    Fail-safe Chart

    See More:

    Toyota Tundra Service Manual > Cylinder Head Gasket(for Bank 1): Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Perform "Inspection After Repairs" after replacing the cylinder head sub-assembly LH (See page ). PROCEDURE 1. INSPECT CYLINDER HEAD SET BOLT 2. INSPECT CYLINDER HEAD SUB-ASSEMBLY LH 3. INSTALL CYLINDER HEAD GASKET LH (a) Check the piston protrusions for ea ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0047