Toyota Tundra Service Manual: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

  • Use the following procedures to troubleshoot the power tilt and power telescopic steering column system.
  • *: Use the Techstream.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT

3.

CHECK CAN COMMUNICATION SYSTEM*

(a) Check for DTCs.

Click here

Result

Proceed to

CAN system DTC is not output

A

CAN system DTC is output

B

HINT:

When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.

B

GO TO CAN COMMUNICATION SYSTEM

A

4.

CHECK FOR DTCs*

(a) Check for DTCs.

Click here

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A

5.

PROBLEM SYMPTOMS TABLE

Result

Proceed to

Fault is not listed in Problem Symptoms Table

A

Fault is listed in Problem Symptoms Table

B

B

GO TO STEP 7

A

6.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Terminals of ECU.

Click here

(b) Data List/Active Test.

Click here

NEXT

7.

REPAIR

NEXT

8.

CONFIRMATION TEST

NEXT

END

    Freeze Frame Data

    IG Power Source Circuit

    See More:

    Toyota Tundra Service Manual > Tire Pressure Warning System: Auto ID Under Registration (C2128/28)
    DESCRIPTION When ID registration is being performed via the automatic ID registration function of the tire pressure warning valve and transmitters, the tire pressure warning ECU and receiver outputs C2128/28 and the tire pressure warning light flashes for 1 minute. Afterward, the tire pressure warni ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0319