Toyota Tundra Service Manual: General Maintenance

GENERAL MAINTENANCE

CAUTION / NOTICE / HINT

HINT:

Inspect these items on a cooled down engine.

PROCEDURE

1. INSPECT DRIVE BELT

Type

See procedures

1UR-FE

See page

3UR-FE

See page

3UR-FBE

See page

2. REPLACE SPARK PLUGS

Type

See procedures

1UR-FE

See page

3UR-FE

See page

3UR-FBE

See page

3. INSPECT ENGINE OIL AND OIL FILTER

Type

See procedures

1UR-FE

See page

3UR-FE

See page

4. REPLACE ENGINE OIL AND OIL FILTER

Type

See procedures

1UR-FE

See page

3UR-FE

See page

3UR-FBE

See page

5. INSPECT ENGINE COOLANT

Type

See procedures

1UR-FE

See page

3UR-FE

See page

3UR-FBE

See page

6. REPLACE ENGINE COOLANT

Type

See procedures

1UR-FE

See page

3UR-FE

See page

3UR-FBE

See page

7. INSPECT COOLING AND HEATER SYSTEM (Except North America)

(a) Check that the radiator, condenser and/or intercooler are not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.

8. INSPECT EXHAUST PIPES AND MOUNTINGS

(a) Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.

9. INSPECT AIR CLEANER FILTER

(a) Remove the air cleaner filter.

(b) Visually check that the air cleaner filter is not excessively damaged or oily.

(c) Replace the air cleaner filter with a new one, if necessary.

10. INSPECT BATTERY ELECTROLYTE LEVEL (Except North America)

Type

See procedures

1UR-FE

See page

3UR-FE

See page

11. REPLACE FUEL FILTER (Except North America)

Type

See procedures

1UR-FE

See page

3UR-FE

See page

12. INSPECT FUEL TANK CAP GASKET

Type

See procedures

1UR-FE

See page

3UR-FE

See page

3UR-FBE

See page

13. INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND

(a) Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.

    Engine

    Inside Vehicle

    See More:

    Toyota Tundra Service Manual > Seat Belt Warning System: Terminals Of Ecu
    TERMINALS OF ECU 1. CHECK COMBINATION METER ASSEMBLY (a) Disconnect the J28 combination meter assembly connector. (b) Disconnect the J28 combination meter assembly connector. (c) Measure the resistance and voltage according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Termi ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0086