ON-VEHICLE INSPECTION PROCEDURE 1. CHECK STEERING WHEEL FREE PLAY
(b) Gently turn the steering wheel to the right and left with a finger, and check the steering wheel free play. Maximum free play: 30 mm (1.18 in.) 2. CHECK STEERING EFFORT
(b) Remove the steering wheel pad (See page ). (c) Start the engine and idle it. (d) Measure the steering effort in both directions. Steering effort (Reference): 4.9 N*m (50 kgf*cm, 43 in.*lbf) HINT: Check the tire type, pressure and contact surface before making your diagnosis. (e) Tighten the steering wheel set nut. Torque: 50 N·m {510 kgf·cm, 37 ft·lbf} (f) Install the steering wheel pad (See page ). |
Toyota Tundra Service Manual > Differential Carrier Assembly(for 3ur-fe, 3ur-fbe): Removal
REMOVAL PROCEDURE 1. REMOVE REAR WHEEL 2. REMOVE PROPELLER SHAFT ASSEMBLY (a) Remove the propeller shaft for 2WD (See page ). (b) Remove the propeller shaft for 4WD (See page ). 3. DRAIN DIFFERENTIAL OIL 4. REMOVE REAR AXLE SHAFT LH (a) Remove the rear axle shaft LH (See page ). 5. REMOVE REAR AXLE ...