PRECAUTION 1. HANDLING PRECAUTIONS FOR STEERING SYSTEM (a)
The vehicle is equipped with an SRS (Supplemental Restraint System)
such as airbags. Failure to carry out service operations in the correct
sequence could cause the SRS to unexpectedly deploy during servicing.
This may cause a serious accident. Before servicing (including
inspection, replacement, removal and installation of parts), be sure to
read the precautionary notices for the Supplemental Restraint System
(See page 2. PRECAUTIONS FOR REMOVAL, INSTALLATION AND REPLACEMENT OF POWER STEERING COMPONENTS (a) Be sure to turn the front wheels straight ahead when removing and installing the power steering link assembly. (b) If disconnecting the steering sliding yoke and the pinion shaft of the power steering link assembly, be sure to put matchmarks on them before starting the operation. |
Toyota Tundra Service Manual > Parking Brake: Parking Brake Switch
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. REMOVE PARKING BRAKE SWITCH ASSEMBLY 2. CHECK PARKING BRAKE SWITCH ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard resistance: Tester Connection Switch Condition Specified Condition 1 - Switch body gr ...
