Toyota Tundra Service Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

(a) Install the air conditioning amplifier assembly with the 2 screws.

(b) for Manual Air Conditioning System:

Connect the 2 connectors.

(c) for Automatic Air Conditioning System:

Connect the 3 connectors.

2. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY

Click here

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

Click here

5. INSTALL LOWER INSTRUMENT PANEL

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

6. INSTALL INSTRUMENT SIDE PANEL RH

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

8. INSTALL COWL SIDE TRIM BOARD RH

(a) for Double Cab:

HINT:

Use the same procedure described for the LH side.

Click here

(b) for CrewMax:

HINT:

Use the same procedure described for Double Cab.

9. INSTALL FRONT DOOR SCUFF PLATE RH

(a) for Double Cab:

HINT:

Use the same procedure described for the LH side.

Click here

(b) for CrewMax:

HINT:

Use the same procedure described for the LH side.

Click here

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

11. PERFORM DIAGNOSTIC SYSTEM CHECK

Click here

12. CHECK SRS WARNING LIGHT

Click here

    Components

    Removal

    See More:

    Toyota Tundra Service Manual > Blind Spot Monitor System: Open in Outer Mirror Indicator(Slave) (C1AB5)
    DESCRIPTION This DTC is stored when the blind spot monitor sensor LH detects an open in the outer rear view mirror indicator LH. DTC No. DTC Detection Condition Trouble Area C1AB5 Both of the following conditions are met: The blind spot monitor system is on The current flowing to the indicator is be ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0193