Toyota Tundra Service Manual: Removal

REMOVAL

PROCEDURE

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

3. REMOVE FRONT DOOR SCUFF PLATE RH

(a) for Double Cab:

HINT:

Use the same procedure described for the LH side.

Click here

(b) for CrewMax:

HINT:

Use the same procedure described for the LH side.

Click here

4. REMOVE COWL SIDE TRIM BOARD RH

(a) for Double Cab:

HINT:

Use the same procedure described for the LH side.

Click here

(b) for CrewMax:

HINT:

Use the same procedure described for Double Cab.

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

6. REMOVE INSTRUMENT SIDE PANEL RH

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

7. REMOVE LOWER INSTRUMENT PANEL

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

8. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

Click here

9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

10. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY

Click here

11. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

(a) for Manual Air Conditioning System:

Disconnect the 2 connectors.

*A

for Manual Air Conditioning System

*B

for Automatic Air Conditioning System

(b) for Automatic Air Conditioning System:

Disconnect the 3 connectors.

(c) Remove the 2 screws and air conditioning amplifier assembly.

    Installation

    Air Conditioning Panel

    See More:

    Toyota Tundra Service Manual > Vehicle Stability Control System: Yaw Rate Sensor Malfunction (C1436)
    DESCRIPTION This DTC is stored when the skid control ECU (brake actuator assembly) detects improper installation of the yaw rate and acceleration sensor (airbag sensor assembly) or an abnormality in the difference between the yaw rate sensor value and the control value estimated based on the acceler ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0174