ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT COOLER CONDENSER ASSEMBLY (a) If the fins of the cooler condenser are dirty, clean them with water. Dry the fins with compressed air. NOTICE: Do not damage the fins of the condenser. (b) If a fin of the cooler condenser is bent, straighten it using a screwdriver or pliers. 2. CHECK CONDENSER FOR LEAKAGE OF REFRIGERANT (a) Using a halogen leak detector, check the pipe joints for gas leakage. (b) If gas leakage is detected in a joint, check the torque of the joint. |
Toyota Tundra Service Manual > Tire Pressure Warning System: Registration
REGISTRATION PROCEDURE 1. BEFORE REGISTRATION NOTICE: The transmitter ID is written on the tire pressure warning valve and transmitter. It is not possible to read the transmitter ID after installing the tire onto the wheel. Therefore, make a note of the transmitter ID before installing the tire. Tir ...
