Toyota Tundra Service Manual: Removal

Toyota Tundra Service Manual / Vehicle Interior / Air Conditioning / Room Temperature Sensor(for Automatic Air Conditioning System) / Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT DOOR SCUFF PLATE LH

(a) for Double Cab:

Click here

(b) for CrewMax:

Click here

2. REMOVE COWL SIDE TRIM BOARD LH

(a) for Double Cab:

Click here

(b) for CrewMax:

HINT:

Use the same procedure described for Double Cab.

3. REMOVE INSTRUMENT SIDE PANEL LH

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

(a) for Column Shift Type:

Click here

(b) for Floor Shift Type:

HINT:

Use the same procedure described for Column Shift Type.

5. REMOVE COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR

(a) Detach the 2 claws and pull out the cooler (room temperature sensor) thermistor to downward.

(b) Disconnect the air hose and connector, and remove the cooler (room temperature sensor) thermistor.

Installation

Solar Sensor(for Automatic Air Conditioning System)

See More:

Toyota Tundra Owners Manual > Using the driving support systems: Rear view monitor system
The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually ...