Toyota Tundra Service Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY) (for Regular Cab)

(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

Tester Connection

Switch Condition

Specified Condition

1 (L) - 7 (E)

Lock

Below 1 Ω

1 (L) - 7 (E)

OFF

10 kΩ or higher

9 (UL) - 7 (E)

9 (UL) - 7 (E)

Unlock

Below 1 Ω

If the result is not as specified, replace the power window regulator master switch assembly (door control switch assembly).

Text in Illustration

*a

Component without harness connected

(Power Window Regulator Master Switch Assembly (Door Control Switch Assembly))

*b

Unlock

*c

Lock

2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY) (for Double Cab, for Crew Max)

(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

Tester Connection

Switch Condition

Specified Condition

2 (L) - 1 (E)

Lock

Below 1 Ω

2 (L) - 1 (E)

OFF

10 kΩ or higher

9 (UL) - 1 (E)

9 (UL) - 1 (E)

Unlock

Below 1 Ω

If the result is not as specified, replace the power window regulator master switch assembly (door control switch assembly).

Text in Illustration

*a

Component without harness connected

(Power Window Regulator Master Switch Assembly (Door Control Switch Assembly))

*b

Unlock

*c

Lock

    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Touch Select 2-4 And High-low System: Automatic Disconnecting Differential Motor Limit Switch Circuit (P17A4)
    DESCRIPTION When the A.D.D. actuator is switching between 2WD and 4WD, the DL1 and DL2 terminals of the limit switch are in one of the ON/OFF combinations listed in the table below. Terminal In 2WD Switching between 2WD and 4WD In 4WD DL1 OFF (OPEN) ON (GND) ON (GND) DL2 ON (GND) ON (GND) OFF (OPEN) ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0123