Toyota Tundra Service Manual: Installation

Toyota Tundra Service Manual / Vehicle Interior / Door Lock / Door Control Switch(for Front Lh) / Installation

INSTALLATION

PROCEDURE

1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY)

(a) Install the power window regulator master switch assembly (door control switch assembly) with the 3 screws.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

2. INSTALL FRONT ARMREST UPPER BASE PANEL LH

(a) Connect the connector.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

(b) Attach the 2 clips and 5 claws to install the front armrest upper base panel LH.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax
    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Occupant Classification System: Initialization
    INITIALIZATION NOTICE: Make sure that the front passenger seat is not occupied before performing the operation. HINT: Perform the zero point calibration and sensitivity check if any of the following conditions apply. The occupant classification ECU is replaced. Accessories (seatback tray and seat co ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0285