Toyota Tundra Service Manual: Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT ARMREST UPPER BASE PANEL LH

(a) Using a moulding remover A, detach the 2 clips and 5 claws, and remove the front armrest upper base panel LH.

Text in Illustration

*A	for Regular Cab
*B	for Double Cab, for CrewMax

(b) Disconnect the connector.

Text in Illustration

*A	for Regular Cab
*B	for Double Cab, for CrewMax

2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY)

(a) Remove the 3 screws and power window regulator master switch assembly (door control switch assembly).

Text in Illustration

*A	for Regular Cab
*B	for Double Cab, for CrewMax

Toyota Tundra Service Manual > Blind Spot Monitor System: Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete (C1ABC)
DESCRIPTION This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor LH. HINT: This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that beam axis inspection is performed. Completing the beam axis i ...

Toyota Tundra Owners Manual