Toyota Tundra Service Manual: Door Control Switch(for Front Rh)

Toyota Tundra Service Manual / Vehicle Interior / Door Lock / Door Control Switch(for Front Rh)

Components

COMPONENTS

ILLUSTRATION

ILLUSTRATION

Inspection

INSPECTION

PROCEDURE

1. INSPECT DOOR CONTROL SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

Tester Connection

Switch Condition

Specified Condition

4 (L) - 3 (E)

Lock

Below 1 Ω

4 (L) - 3 (E)

OFF

10 kΩ or higher

2 (UL) - 3 (E)

2 (UL) - 3 (E)

Unlock

Below 1 Ω

If the result is not as specified, replace the door control switch assembly.

Text in Illustration

*a

Component without harness connected

(Door Control Switch Assembly)

*b

Unlock

*c

Lock

Installation

INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL SWITCH ASSEMBLY

(a) Attach the 2 claws to install the door control switch assembly.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

2. INSTALL FRONT ARMREST UPPER BASE PANEL RH

(a) Connect each connector.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

(b) Attach the 2 clips and 5 claws to install the front armrest upper base panel RH.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT ARMREST UPPER BASE PANEL RH

(a) Using a moulding remover, detach the 2 clips and 5 claws, and remove the front armrest upper base panel RH.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

(b) Disconnect each connector.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

2. REMOVE DOOR CONTROL SWITCH ASSEMBLY

(a) Detach the 2 claws and remove the door control switch assembly.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax
    Removal

    Door Control Transmitter

    See More:

    Toyota Tundra Service Manual > Rear Brake: Disassembly
    DISASSEMBLY PROCEDURE 1. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP 2. REMOVE REAR DISC BRAKE BLEEDER PLUG 3. REMOVE CYLINDER BOOT (a) Using a screwdriver, remove the cylinder boot from the cylinder. HINT: Tape the screwdriver tip before use. 4. REMOVE REAR DISC BRAKE PISTON (a) Place a piece of cloth ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0099