REMOVAL PROCEDURE 1. REMOVE TRANSMITTER HOUSING COVER Click here 2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY Click here 3. REMOVE TRANSMITTER BATTERY Click here |
Toyota Tundra Service Manual > Engine Unit: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL STUD BOLT (a) Install the timing chain cover stud bolt. (1) Using an E10 "TORX" socket wrench, install the 2 stud bolts as shown in the illustration. Torque: 20 N·m {204 kgf·cm, 15 ft·lbf} (b) Install the oil pan stud bolt. (1) Using an E6 and E7 "TORX" socket wren ...
