CUSTOMIZE PARAMETERS CUSTOMIZE KEY REMINDER WARNING SYSTEM (a) Customizing with the Techstream (1) Connect the Techstream to the DLC3. (2) Turn the ignition switch to ON. (3) Turn the Techstream on. (4) Enter the following menus: Customize / Warning. (5) Select the setting by referring to the table below. NOTICE: Be sure to record the current value before customizing. Warning
|
Toyota Tundra Service Manual > Front Evaporator Temperature Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 1 COOLER THERMISTOR NOTICE: If reusing the evaporator, do not insert the No. 1 cooler thermistor into a location where the No. 1 cooler thermistor was previously inserted. Insert the No. 1 cooler thermistor within range C shown in the illustration. (a) Install t ...
