Toyota Tundra Owners Manual: Warning lights and indicators

Toyota Tundra Owners Manual / Instrument cluster / Warning lights and indicators

The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle's various systems.

For the purpose of explanation, the following illustration displays all warning lights and indicators illuminated.

Warning lights and indicators

Warning lights

Warning lights inform the driver of malfunctions in the indicated vehicle's systems.

Brake system warning light
Brake system warning light
Charging system warning light
Malfunction indicator lamp
Malfunction indicator lamp
SRS warning light
ABS warning light
ABS warning light
Low fuel level warning light
Seat belt reminder light
Master warning light
Parking brake warning light
Parking brake warning light
Tire pressure warning light
Slip indicator
PCS warning light
LDA indicator
High engine coolant temperature warning light
Low windshield washer fluid warning light
Low fuel level warning light
Brake Override System/ Drive-Start Control warning light
Automatic High Beam indicator

*1: These lights turn on when the engine switch is turned to the "ON" position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
*2: The light comes on to indicate a malfunction.
*3: The light flashes to indicate a malfunction.
*4: The light illuminates on the multi-information display.
*5: If equipped

Indicators

The indicators inform the driver of the operating state of the vehicle's various systems.

Turn signal indicator
Headlight indicator
Tail light indicator
Headlight high beam indicator
Automatic High Beam indicator
Parking brake indicator
Parking brake indicator
Cruise control indicator
Cruise control "SET" indicator
LDA indicator
Front fog light indicator
"AIR BAG ON" and "AIR BAG OFF" indicators
Dynamic radar cruise control indicator
Slip indicator
VSC off indicator
"TOW HAUL" indicator
"BSM" indicator
BSM outside rear view mirror indicator
"TRAC OFF" indicator
"RCTA" indica
Security indicator
"AUTO LSD" indicator
PCS warning light
"4HI" indicator
"4LO" indicator
Trailer connection indicator
Low outside temperature indicator

*1: These lights turn on when the engine switch is turned to the "ON" position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
*2: The light flashes to indicate that the system is operating.
*3: In order to confirm operation, the BSM outside rear view mirror indicators illuminate in the following situations:

  • When the engine switch is turned to the "ON" position, the BSM function is enabled on the screen of the multi-information display.
  • When the BSM function is enabled on the screen of the multi-information display, the engine switch is turned to the "ON" position.

If the system is functioning correctly, the BSM outside rear view mirror indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction with the system.
If this occurs, have the vehicle inspected by your Toyota dealer.

*4: The light illuminates on the outside rear view mirrors.
*5: The light illuminates on the center panel.
*6: The light illuminates on the multi-information display.
*7: When the outside temperature is approximately 37ºF (3ºC) or lower, the indicator will flash for 10 times, then comes on.
*8: The light comes on when the system is turned off.
*9: If equipped

WARNING

■If a safety system warning light does not come on Should a safety system light such as the ABS and SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.

    Instrument cluster

    Gauges and meters

    See More:

    Toyota Tundra Service Manual > Cylinder Head Gasket(for Bank 2): Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Perform "Inspection After Repairs" after replacing the cylinder head sub-assembly RH (See page ). PROCEDURE 1. INSPECT CYLINDER HEAD SET BOLT 2. INSPECT CYLINDER HEAD SUB-ASSEMBLY RH 3. INSTALL CYLINDER HEAD GASKET RH (a) Check the piston protrusions for ea ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0158