Toyota Tundra Service Manual: Operation Check

OPERATION CHECK

1. CHECK KEY REMINDER WARNING SYSTEM

(a) Check that the key reminder warning buzzer sounds.

(1) With the driver side door closed, insert the key into the ignition key cylinder and then turn the key to the LOCK or ACC position.

(2) Check that the buzzer sounds intermittently if the driver side door is opened.

(b) Check that the key reminder warning buzzer stops.

(1) Check that the buzzer stops sounding when any of the following operations is performed while the buzzer is sounding:

  • Close the driver side door (front door courtesy switch is off).
  • Turn the ignition switch to the ON position.
  • Remove the key from the ignition key cylinder.
    Key Reminder Buzzer does not Sound

    Parts Location

    See More:

    Toyota Tundra Service Manual > Valve Body Assembly: Inspection
    INSPECTION PROCEDURE 1. INSPECT SHIFT SOLENOID VALVE SL1 (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 5.0 to 5.6 Ω (b) Apply 12 V battery voltage to the shift solenoid valve and chec ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0324