Toyota Tundra Service Manual: CD/DVD Sound Skips

PROCEDURE

1.

CHECK DISC

(a) Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc.

NG

CHANGE DISC

OK

2.

CHECK DISC

(a) Disc cleaning

(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.

OK

END (DISC IS DIRTY)

NG

3.

REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

OK

END (DISC IS DEFECTIVE)

NG

4.

CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

(a) Check that the radio and display receiver assembly is properly installed

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG (for Column Shift Type)

C

NG (for Floor Shift Type)

C

A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

C

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

D

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

    Black Screen

    Cellular Phone Inspection

    See More:

    Toyota Tundra Service Manual > Power Window Regulator Motor(for Front Door): Removal
    REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH side and RH side. The procedure listed below is for the LH side. PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0096