Toyota Tundra Service Manual: Installation

Toyota Tundra Service Manual / Vehicle Interior / Door Lock / Rear Door Lock(for Double Cab) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL REAR DOOR INSIDE LOCKING CABLE ASSEMBLY LH

2. INSTALL REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH

3. INSTALL REAR DOOR LOCK ASSEMBLY LH

4. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH

5. INSTALL REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY LH

6. INSTALL REAR DOOR GLASS RUN LH

7. INSTALL REAR DOOR SERVICE HOLE COVER LH

8. INSTALL REAR NO. 2 DOOR TRIM BRACKET

9. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

10. INSTALL REAR DOOR ARMREST COVER LH

11. INSTALL REAR DOOR FRAME GARNISH LH

12. INSTALL REAR UPPER DOOR ARMREST BASE PANEL LH

13. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

See More:

Toyota Tundra Service Manual > Cruise Control System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: Before replacing the ECM, refer to Registration. Click here HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area ...

Toyota Tundra Service Manual: Installation

Inspection

Removal

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual