REMOVAL PROCEDURE 1. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt)
2. REMOVE UPPER STEERING COLUMN COVER (for Manual Tilt)
3. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)
4. REMOVE UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)
5. REMOVE LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)
6. REMOVE UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)
7. REMOVE UNLOCK WARNING SWITCH ASSEMBLY 
(a) Disconnect the connector. (b) Insert the key. (c) Remove the unlock warning switch assembly by releasing the 2 claws. HINT: Slide the unlock warning switch assembly in the direction shown by the arrow in the illustration to remove it. Text in Illustration
|
Toyota Tundra Service Manual > Front Door Lock(for Crewmax): Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedures for the LH side and RH side. The procedures listed below are for the LH side. A bolt without a torque specification is shown in the standard bolt chart (See page ). PROCEDURE 1. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY LH 2. ...
