Toyota Tundra Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL WASHER HOSE ASSEMBLY

(a) Attach the 3 clamps to install the washer hose assembly.

(b) Connect the washer hose assembly.

2. INSTALL FRONT WASHER NOZZLE AND HOSE ASSEMBLY

3. INSPECT FRONT WASHER NOZZLE AND HOSE ASSEMBLY

4. ADJUST FRONT WASHER NOZZLE AND HOSE ASSEMBLY

5. INSTALL HOOD INSULATOR (w/ Hood Insulator)

(a) Attach the 2 guides to install the hood insulator.

(b) Install the 10 clips.

6. INSTALL HOOD TO RADIATOR SUPPORT SEAL

(a) Install the hood to radiator support seal with the 10 clips.

7. INSTALL HOOD BULGE ASSEMBLY

(a) Attach the 8 clips to install the hood bulge assembly.

(b) Install the 3 bolts.

Torque:

7.0 N·m {71 kgf·cm, 62 in·lbf}

    On-vehicle Inspection

    Rear Door(for Crewmax)

    See More:

    Toyota Tundra Service Manual > Blind Spot Monitor System: Data List / Active Test
    DATA LIST / ACTIVE TEST 1. DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0086