Toyota Tundra Service Manual: Disc cannot be Ejected

Toyota Tundra Service Manual / Audio, Visual, Telematics / Audio / Video / Audio And Visual System / Disc cannot be Ejected

PROCEDURE

1.

PRESS "EJECT" AND CHECK OPERATION

(a) Press the disc eject switch of the radio and display receiver assembly for 2 seconds or more and check that the disc is ejected.

OK:

Disc is ejected.

Result

Result

Proceed to

OK

A

NG (for Column Shift Type)

B

NG (for Floor Shift Type)

C
B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

C

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

A

2.

REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with a known good one and check that the malfunction disappears.

OK:

Disc is ejected.

Result

Result

Proceed to

OK

A

NG (for Column Shift Type)

B

NG (for Floor Shift Type)

C
A

END (DISC IS DEFECTIVE)
B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

C

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

    Diagnostic Trouble Code Chart

    Disc cannot be Inserted or is Ejected Right After Insertion

    See More:

    Toyota Tundra Service Manual > Transfer Assembly: Reassembly
    REASSEMBLY CAUTION / NOTICE / HINT HINT: Coat all of the sliding and rotating surfaces with Toyota Genuine Transfer gear oil LF 75W or equivalent before reassembly. PROCEDURE 1. INSTALL TRANSFER CASE OIL SEAL (a) Using SST and a hammer, tap in a new transfer case oil seal as shown in the illustratio ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0089