Toyota Tundra Service Manual: Problem Symptoms Table

Toyota Tundra Service Manual / Vehicle Interior / Engine Immobiliser / Engine Immobiliser System (w/o Smart Key System) / Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in the order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Engine Immobiliser System

Symptom	Suspected Area	Link
Engine does not start because no initial combustion occurs	Proceed to "Engine does not Start because No Initial Combustion"
Engine does not start but initial combustion occurs	Proceed to "Engine does not Start but Initial Combustion Occurs"
Security indicator light does not blink	Proceed to "Security Indicator Light Does not Blinking"
Key cannot be registered	Proceed to "Key Cannot be Registered"

See More:

Toyota Tundra Service Manual > Blind Spot Monitor System: Yaw Rate Sensor (C1A46)
DESCRIPTION The blind spot monitor sensor receives yaw rate signals from the yaw rate sensor via CAN communication. DTC No. DTC Detection Condition Trouble Area C1A46 A fail flag is transmitted from the yaw rate sensor Vehicle stability control system Blind spot monitor sensor LH Blind spot monitor ...

Toyota Tundra Service Manual: Problem Symptoms Table

Precaution

Registration

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual