PROCEDURE
(a) Display the "Display" screen. (b) Turn the light control switch to the tail or head position. (c) Check if "Day Mode" on the display adjustment screen is on. OK: "Day Mode" setting is off
(a) Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page )] (b) Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation. OK:
HINT: This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation. Result
|
Toyota Tundra Service Manual > Seat Belt: Tongue Plate Stopper
Components COMPONENTS ILLUSTRATION Replacement REPLACEMENT PROCEDURE 1. REMOVE TONGUE PLATE STOPPER (a) Slide the tongue plate above the installation position of the tongue plate stopper, and temporarily hold it with adhesive tape. (b) Remove any pieces of the original tongue plate stopper in the be ...